iPRO Markers are the most practical solution for marking buried objects or setting lines and boundaries
iPRO Markers are the most practical solution for marking buried objects or setting lines and boundaries
Once installed in the ground, iPRO Markers help to indicate buried objects (tanks, sprinklers, cables, sensors, etc), show ground hazards and mark out building sites, camp sites etc.
For sports fields, iPRO Markers provide a very practical and cost effective way to mark positions on the playing surface and to display locations for line marking with iPRO Markers clearly visible in the grass. iPRO Markers can be either left in the ground permanently or moved as and when required.
With the provided tools, iPRO Markers are simply knocked or screwed into the ground so that their coloured, synthetic grass tops remain visible. When the grass is next cut, the iPRO Markers are trimmed to the correct level. This means that they are still visible and are level with the length of the grass.
iPRO Markers are available in boxes of 25 with three different installation tools. Available in blue, white, yellow, red and white. Brush is UV treated.
Frequent uses:
Sports Fields
Season after season, the
iPRO Markers mark out the
playing areas, ensure the
precision of the measurements
and facilitate the marking of
the lines.
Construction
Use iPRO Markers to locate
buried electrical cables, gas
tanks, water pipes. Different
colours will show different
installations.
Irrigation
iPRO Markers can be used
to mark the exact position of
hidden sprinklers on sports
fields, golf courses and in parks
and gardens.
Golf
Golf greenkeepers use the
iPRO Markers to mark distance
to the hole, sprinklers, grounds
under repair and hazards.
Parking lots
iPro markers rapidly show
visible spaces.
Planting:
INSERTING TOOL
- Manually drive the iPRO Markers 2 cm (3/4’) into the ground
- Hold the fibres together and slide them inside the inserting tube
- Using a mallet, strike the inserting tool until the ”STOP” line on the tool has been reached
- Remove the inserting tool. This will leave 3 to 4 cm of fibres above the ground level
- Pour sand between the fibres to fill the empty space just created
- The sand will reinforce the iPRO Markers resistance and make it more visible
- Gently press the fibres using your foot or the mallet head
SPANNER FOR SCREWDRIVER
- Manually drive the iPRO Markers 2 cm (3/4’) into the ground
- Place the spanner into the iPRO Markers
- Turn until 3 to 4 cm of fibres are above the ground level
- Remove the spanner
- Pour sand between the fibres to fill the empty space just created
- The sand will reinforce the iPRO Markers resistance and make it more visible
- Gently press the fibres using your foot or the mallet head
T-BAR HAND TOOL
- Manually drive the iPRO Markers 2 cm (3/4’) into the ground
- Place the T-Bar tool into the iPRO Markers
- Turn until 3 to 4 cm of fibres are above the ground level
- Remove the spanner
- Pour sand between the fibres to fill the empty space just create
- The sand will reinforce the iPRO Markers resistance and make it more visible
- Gently press the fibres using your foot or the mallet head
iPRO Markers specifications
- Fibres
UV treated polyethylene threads - Spiral cone
Recycled polyethylene
iPRO Markers specifications
- Fibres
UV treated polyethylene threads - Spiral cone
Recycled polyethylene